It’s made starting with making mushroom spots, felt eyes, then starting with a crochet piece with a mushroom cap and mushroom base, and then how to assemble all parts.

Materials needed are any yarn weight with a suitable hook, black and white felt, stuffing, a tapestry needle, and scissors.

This playful amigurumi is perfect for gamers, collectors, and lovers of cute handmade decor. It can be displayed on a shelf, and it can also be used as a fun gift.

You can customize this power mushroom by adding a cute smile to its face for a different look.

Designer: Crochet Hippy Designs

Materials

• Yarn – whatever you prefer in colors:
• Color A (mushroom top): red/green/purple/yellow/blue
• (Mushroom Base): Almond
• Color B (Spots): white/pink/red
• (Eyes): Black
• Black and white felt for the eyes/spots
• Crochet hook – personal preference
• Polyfill stuffing
• Darning needle
• Scissors

Abbreviations

Mr – magic ring
sc – single crochet
inc – increase
dec – decrease
* – repeat
c/c – color change
BLO – back loops only
sl st – slip stitch

Mushroom Spots x5

There are two options for adding your spots for the mushroom top. You can either cut out white felt and glue it on or crochet the spots and sew them in individually.

Felt:

For the felt eyes, cut out 5 circular spots out of white felt. If you are still on the newer side of felt, cut a piece of cardboard as a base first and then use that piece to help stabilize your felt as you are cutting.

Crochet:

In white yarn.

Rnd 1: 8 sc in a Mr (8)
Rnd 2: *inc* (16)

Sl st two stitches past stitch marker and fasten off leaving a long tail to sew in.

Mushroom Cap

Start in color A yarn.

Rnd 1: 8 sc in a Mr (8)
Rnd 2: *inc* (16)
Rnd 3: (1 sc, 1 inc) x 8 (24)
Rnd 4: (2 sc, 1 inc) x 8 (32)
Rnd 5: (3 sc, 1 inc) x 8 (40)
Rnd 6-10: *sc* (40) (5 rounds)

Color change to almond yarn.

Do not stuff the top of the mushroom head.

At this point, if you will be sewing the mushroom spots on, do so after finishing R10 before moving on to the base of the body. Sew 4 spots evenly apart from the mushroom cap in between R5-R8 and one directly on top of the mushroom cap. If you are using felt for the mushroom spots, you can glue those on now or at the end of the pattern.

Mushroom Base

Using almond yarn.

Rnd 11: BLO: (3 sc, 1 dec) x 8 (32)
Rnd 12: *sc* (32)
Rnd 13: (2 sc, dec) x 8 (24)
Rnd 14: *sc* (24)
Rnd 15: (1 sc, 1 dec) x 8 (16)
Rnd 16: *sc* (16)
Rnd 17: *dec* (8)
Rnd 18: (3 sc per stitch) (24)
Rnd 19-25: *sc* (24) (7 rounds)
Rnd 26: BLO: (2 sc, dec) x 6 (18)
Rnd 27: dec x 9 (9)

Fasten off, leaving a tail to sew closed and hide the ends.

Stuff base of mushroom after R25. Ensure that you don’t overstuff to maintain a flat bottom.

Eyes x2

There are two options on how you can add eyes. You can either cut out black felt and glue them on or you can take a strand of black yarn and sew in to create an ovel shape.

Felt:

For the felt eyes – cut out 2 oval shaped eyes out of black felt. If you are still on the newer side of felt – cut a piece of cardboard as a base first and then use that piece to help stabilize your felt as you are cuttting.

Sewn:

Take a piece of black yarn and sew across roughly 2-3 stitches down the eye – repeat until desired thickness.

Placement:

Place eyes between R22-R24 and roughly 2-3 stitches apart.

The post Power Mushroom Amigurumi Free Crochet Pattern appeared first on Yarn Gems.

It’s crafted with any yarn weight you prefer with red, light green, dark green, white, black, pink shades, felt for spots, a suitable hook to the yarn used, stuffing, a bag of beads or sand to be added into the base of the pot.

This tutorial includes how to make the head, the inside mouth piece, outer mouth, pot base, stem, tongue, leaves, spots, also it contains how to assemble all parts.

It’s great for gaming fans, room décor, handmade gifts, desk or shelf displays, collector items, and craft makers.

Designer: CrochetHippyDesigns

Materials

• Yarn you like in colors:
• Red, light green, dark green white, black, pink
• White felt for the spots
• Crochet hook size your prefer
• Stuffing
• Darning Needle
• Scissors

Abbreviations

Mr – magic ring
sc – single crochet
inc – increase
dec – decrease
C/C – color change
F/O – fasten off
BLO – back loops only
sl st – slip stitchh
SK – skip stitch
hdc – half double crochet
dc – double crochet
Picot stitch

Head

In red yarn.

Rnd 1: 8 sc in a Mr (8)
Rnd 2: inc (16)
Rnd 3: (1 sc, inc) x 8 (24)
Rnd 4: (2 sc, inc) x 8 (32)
Rnd 5-8: (4 rounds) sc (32)
Rnd 9: 8 sc – ch 16 and sk 16 stitches – 8 sc (32)
Rnd 10-11: (2 rounds) sc (32)
Rnd 12: (2 sc, dec) x 8 (24)
Rnd 13: (1 sc, dec) x 8 (16)
Rnd 14: dec (8)

F/O leaving long tail to sew closed and hide ends.

Inside Mouth Piece

Using black yarn.

Rnd 1: 8 sc in a Mr (8)
Rnd 2: inc (16)
Rnd 3: (1 sc, inc) x 8 (24)
Rnd 4: (2 sc, inc) x 8 (32)

Fold mouth piece in half and sl st both sides of the fold together to create an inner mouth crease. Once you get to the end – F/O leaving long tail to sew into head in the next section.

Assembly

At this point now that you have both piece done – you will be sewing the mouth crease inside of the head – once you are almost done sewing in – start to stuff. It is okay if oyur stitch count is off or if you have to sew the same stitch on the mouth piece into multiple stitches of the head. Once you are sewing closed – secure and hide end inside.

Outer Mouth

For the 2 lips – we will turning the project after R2 – do not ch 1.

Using white yarn.

Rnd 1: ch 16 (16)
Rnd 2: starting from the 2nd ch from the hook: 32 sc – 3 hdc – 3 dc – 3 hdc – 3 sc (15) – turn
Rnd 3: sc (15)

Fold project and sl st both sides together. F/O leaving long enough tail to sew into head in a later section.

Sew each outer lip to both sides of the mouth with the sl st edge facing outward (towards the top and the bottom of the face). Once you are done sewing pieces in, tie together and hide ends.

Pot Base

Using dark green yarn.

Rnd 1: 8 sc in a Mr (8)
Rnd 2: inc (16)
Rnd 3: (1 sc, inc) x 8 (24)
Rnd 4: (2 sc, inc) x 8 (32)
Rnd 5: BLO: sc (32)
Rnd 6-14: (9 rounds) sc (32)

Mark unused BL in R15 – we will be going back to use them in the next section.

Rnd 15: FLO: hdc (32)
Rnd 16: hdc (32)
Rnd 17: sl st (32)

F/O and hide in ends.

Reinsert your hook into the unused back loops of R15 with black yarn and ch 1.

Rnd 1: sc (32)
Rnd 2: dec (16)
Rnd 3: dec (8)

Stuff inside of pot before closing up.

F/O, close the gap and hide ends inside pot base.

Stem

Using light green yarn:

Leave long tail at the start as we will be using that to sew stem into pot base in a later section.

Rnd 1: ch 10 – attach to the first stitch we made with a sc
Rnd 2-11: (10 rounds) sc (10)
Rnd 12: inc (20)
Rnd 13: (sc – sc – hdc – picot – sc – sc) x 4 (20)

F/O leaving long enough tail to secure the stem to both the base and the head.

Stem Assembly

• Sew the stem into the center of the pot base – you may to sew a bit in the back to secure and stabilize the stem so it is able to handle the weight of the head once assembled.
• If you are using a blanket yarn you may want to consider using a neck stabilizer like a pool noodle or something similar to help with weight distribution.

Tongue

Using pink yarn: ch 6 and starting from the 2nd ch from the hook – 5 hdc down and F/O leaving long tail to sew into the center of the mouth. You can add ch’s if you would like to have a longer tongue.

Leaves x 2

Using light green yarn: ch 10 and starting from the 2nd ch from the hook – sc – (hdc – picot – hdc) x 3 – (sl st) x 2
On the other side of the ch:
(sl st) x 2 – (hdc – picot – hdc) x 3 – sc
F/O leaving long tail to sew and sew each leaf on either side of the stem once assembled.

Spots x 5

Using white yarn.

Rnd 1: 8 sc in a Mr (8)
Rnd 2: (1 sc, inc) x 4 (12)

sl st on stitch past and F/O leaving lont tail to sew in random spots throughout the head.

Assembly

• Sew the top of the stem into the center back of the head in between R5-6 on either side.
• Sew the bottom of the stem in between R10-11 on either side.
• Once you have your 4 corners secured – go back and secure the rest of the stem base.
• After then – secure ends and hide inside body.

The post Amigurumi Chompy Plant Free Crochet Pattern appeared first on Yarn Gems.

The final size is 5cm. To make many mini R.E.P.O. toys, you can customize this tutorial by using thicker yarn with a suitable hook and different colors.

Materials needed to finish this plushie are sport weight cotton yarn with a 2 mm crochet hook, 15 mm safety eyes, acrylic paint in black and white and a fine paint brush, stuffing, and a tapestry needle.

It’s an ideal gift for fans, cosplay lovers, or gaming shelf displays, and as a keychain.

Let’s get started!

Designer: Pumpi Crochet

Materials

• Cototn yarn in thickness 2 or sport, in color of your choise.
• 2 mm crochet hook.
• 15 mm safety eyes.
• For the eyes: acrylic paint in black and white and a fine paintbrush.
• Stuffing, needle, scissors.
• Piece of plastic / plastic circles for the base

Size: 5 cm

Abbreviations

Mr – magic ring
sl st – slip stitch
ch – chain
sc – single crochet
inc – increase
dec – decrease
BLO – back loop only

Arms x2

Rnd 1: 3 sc in Mr (3)
Rnd 2: 2 sc. 1 inc (4)
Rnd 3: 3 sc, 1 inc (5)
Rnd 4: 5 sc (5)

Close with the help of a needle passing through the front loop of the 5 remaining stitches and leave a long tail for sewing to the body.

Legs x2

Rnd 1: 4 sc in Mr (4)
Rnd 2: (1 sc, 1 inc) x 2 (6)
Rnd 3: (2 sc, 1 inc) x 3 (8)

Leave a long tail for sewing.

Body

Rnd 1: 8 sc in Mr (8)
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, 1 inc) x 8 (24)
Rnd 4: (1 sc, 1 inc, 1 sc) x 8 (32)
Rnd 5: BLO 32 sl st (32)
Rnd 6: BLO 32 sc (32)

Insert a piece of plastic at the base. covering up to round 4 of the base.

Rnd 7: 32 sc (32)
Rnd 8: BLO 32 sc (32)
Rnd 9: BLO (1 sc, 1 dec, 1 sc) x 8 (24)

Stuff and insert a piece of plastic to help us keep the piece flat.

Rnd 10: (1 sc, 1 dec) x 8 (16)
Rnd 11: 8 dec (8)

Close with the help of a needle passing through the front loop of the 8 remaining stitches.

Head

Rnd 1: 8 sc in Mr (8)
Rnd 2: 8 inc (16)
Rnd 3: (1 sc, 1 inc) x 8 (24)
Rnd 4: (1 sc, 1 inc, 1 sc) x 8 (32)
Rnd 5: BLO 32 sl st (32)
Rnd 6: BLO 32 sc (32)

Insert a piece of plastic at the base, covering up to round 4 of the base.

Rnd 7-10: 32 sc (32) 4 rounds
Rnd 11: (1 sc, 1 dec, 1 sc) x 8 (24)

Insert safety eyes between rounds 8-9 with 2 sc visible of separation between them.

Rnd 12: (1 sc, 1 dec, 1 sc) x 6 (18)
Rnd 13: (1 sc, 1 dec) x 6 (12)

Stuff.

Rnd 14: 6 dec (6)

Close with the help of a needle passing through the front loop of the 8 remaining stitches.

Assembly

• We will join the head to the body, sewing 6 stitches from the body to 6 stitches from the head at the back, sewing using the free front loop of both pieces.
• We will join our arms on both sides of the body.
• Finally we will join the legs at the lower part of the body.

The post Mini R.E.P.O Robot Free Crochet Pattern appeared first on Yarn Gems.